Nowadays, Simplisafe cameras are one of the latest surveillance gadgets that keep an eye on your premises 24×7. Likewise, these are easy to install and access but occasionally, users face a Simplisafe camera blinking red. Likewise, the flashing red on the Simplisafe camera indicates that it is disconnected from the network.
However, this is a temporary issue that is easy to fix. Additionally, before you resolve the Simplisafe camera flashing red error, it is necessary to understand the causes behind this. So, in this brief guide, we share primary reasons and troubleshooting methods to resolve this problem. Let’s have a look beneath:
Why is my Simplisafe camera blinking red?
As explained above, the key reason for the Simplisafe camera blinking red is that it is not connected to the internet. Besides this, a few of the other responsible causes are mentioned below:
- Connection drop-off or poor network signals
- Loose cable connections or damaged ethernet wires
- Insufficient power supply
- Signal interferences
- Camera is out of network range
- Improper network configurations
- 5G bandwidth frequency
- Technical issues or bugs
- Subscription is ended
- No network or ISP issues
Troubleshooting methods for resolving a simple camera blinking red:
Moreover, you are now aware of the key reasons behind the red light error on the Simplisafe camera. Likewise, it is necessary to resolve them for the optimal functioning of the surveillance device. In this section, we share some effective methods to troubleshoot the red light error, let’s have a look beneath:
Reposition the camera
Make sure the camera is placed within the router’s network range. If it is not, then unmount it and reposition it.
Stabilize the internet
If you face issues with your wireless network, then use a wired connection. It will help to resolve the connectivity issues and stabilize the network.
Choose the 2.4GHZ frequency
Generally, Simplisafe cameras do not support 5GHZ band frequency. If your networking device is set to be at 5GHz, then change the network configuration and adjust it to 2.4GHz.
Remove the network obstructions
If there are network interferences present, like mirrors, furniture, baby monitors, etc. Then remove them around from the router or relocate your networking device.
Ensure the sufficient power supply
Check that the camera and the connected devices have an adequate power supply. Make sure that the adapter and the power cables are original that you use.
Reboot the camera and the base station
To fix the technical errors and the connectivity issues, power cycle your camera and the base stations. It will give a fresh start to your device. For this, unplug the camera and the base station for 30 seconds to a minute and then plug back them.
Renew the subscriptions
If your Simplisafe subscription has ended, then renew it as it may also cause disconnectivity errors.
Contact your ISP authority
If internet connectivity errors persist, then contact your ISP authority and follow the guidelines they explain to you.
Final Thoughts
Overall, the information we share here will notify you about the Simplisafe camera blinking red error in detail. Here, you find the responsible causes and the troubleshooting methods for the same. If you are still seeking more information regarding the Simplisafe camera, then stay in touch with us!